在裝修過程中,門是一個非常重要的選擇和安裝項目,越來越多的人選擇當安裝鐵藝大門,不僅在外觀更漂亮,還會有防盜的作用,也在市場上很受歡迎,越來越多的消費者,但這是需要做一些準備在施工之前,當使用通常的保養也是非常重要的。
　　In the process of decoration, the door is a very important choice and installation project. More and more people choose to install the iron gate, which is not only more beautiful in appearance, but also has the function of anti-theft. It is also very popular in the market, more and more consumers, but it is necessary to make some preparations before construction, when using the usual maintenance is also very important.
　　施工前準備:
　　Preparation before construction:
　　1. 制造的鐵藝門進入時應出示出廠證明和檢測報告，并檢查其規格、型號、尺寸是否符合設計要求。
　　1. When the manufactured iron door enters, it shall show the factory certificate and test report, and check whether its specification, model and size meet the design requirements.
　　2、把窗碼放到安全的地方，墊好木板，做好掩護。以免出錯，否則以后與客戶不良合作。
　　2. Put the window code in a safe place, pad the board and cover. To avoid mistakes, or bad cooperation with customers in the future.
　　3.按濟南鐵藝門位置線，按50cm水平線確定安裝標高。
　　3. The installation elevation shall be determined according to the location line of Jinan iron door and the horizontal line of 50cm.
　　4. 打開、檢查和運輸門也很重要，因為我們不希望門在運輸過程中被損壞。
　　4. It is also important to open, inspect and transport the door because we do not want it to be damaged during transport.
　　5,根據工程圖紙質量檢驗規范和檢驗、鐵藝配件,如發現缺少邊角和崎嶇的,錯誤過多,嚴重損害,外觀偏大,應仔細協商,改造后,評估通過考試,能夠安裝,并檢查,鐵藝大門,與原來的電影,如果有破損應該填膠后再安裝施工。
　　5. According to the engineering drawing quality inspection specifications and inspection, iron accessories, if there is a lack of corners and bumps, too many errors, serious damage, and large appearance, it should be carefully negotiated. After the transformation, the evaluation passes the examination, and the iron gate can be installed and inspected. With the original film, if there is any damage, it should be filled with glue before installation and construction.
　　6. 準備好腳手架并采取防護措施。
　　6. Prepare scaffold and take protective measures.
　　維護方法:
　　Maintenance method:
　　1. 避免碰撞。這是消費者在選購時需要注重的一點，在處理過程中需要小心擺放，所應是硬東西不常碰到的地方。一旦選定了地點，就不應該經常改變。安裝的墻面還應保持平整，使鐵門安裝平整，如晃動不穩，天會使鐵門產生輕微變形，影響使用壽命。
　　1. Avoid collision. This is a point that consumers need to pay attention to when purchasing. They need to place it carefully in the process of processing. It should be a place where hard things don't often encounter. Once the location is chosen, it should not be changed often. The installed wall surface should also be kept flat to make the iron door installation flat. If the shaking is not stable, the iron door will be slightly deformed, which will affect the service life.
　　2. 清潔并清除灰塵。更好選擇純棉針織品作為布料，擦拭門面。
　　2. Clean and remove dust. It's best to choose pure cotton knitwear as cloth and wipe the door surface.
　　3.遠離酸堿。如果門不小心沾上了酸堿，應立即用水清洗污垢，然后用干棉布擦干。
　　3. Keep away from acid and alkali. If the door is accidentally stained with acid and alkali, immediately clean the dirt with water, and then dry it with dry cotton cloth.
　　4. 遠離太陽。太陽的照射會對大門產生間接的影響，長期下來會減損鐵門的壽命。
　　4. Keep away from the sun. The sun's radiation will have an indirect impact on the gate, which will reduce the life of the iron gate in the long run.
　　5. 遠離濕氣。門更好安裝在通風處，避免受潮。
　　5. Keep away from moisture. The door should be installed in the ventilated place to avoid dampness.
　　6. 除銹。如果生銹了，不能直接用砂紙打磨，銹跡小，可以用棉紗蘸上銹跡油，然后用棉布擦干。
　　6. remove rust. If it is rusty, it can't be polished directly with sandpaper. If the rust is small, it can be dipped in rust oil with cotton yarn, and then dried with cotton cloth.
　　以上就是濟南鐵藝大門施工前的準備的詳細介紹，想要了解更多請點擊官網http://www.hsmjh.com
　　The above is a detailed introduction to the preparations for the construction of Jinan iron gate. For more information, please click http://www.hsmjh.com